Hoverboard Go Kart Attachment with Seat/Chair for self balance scooter


The best hoverboard kart and chair on the market and made by Koowheel! We took extra time to ensure that it will not break apart or cause other problems associated with the first generation hoverboard go-karts. Last year we sold out. Order now to lock in your hoverboard kart for sale so it doesn’t happen to you!

Compatible with most hoverboard models including:

  • 6.5″ DailySaw
  • 8″ AlienSaw
  • 8.5″ RockSaw
  • 6.5″ JamSaw
  • 10″ StabilitySaw

You may also try and use the hoverboard kart on a FutureSaw, but modifications must be made to the chair to ensure that the sensors are properly engaged. We recommend using a 6″ x 4″ x 1/2″ metal plate or a piece of thin wood. Place this between the kart and hoverboard for best use.

SKU: hoverboard-kart Categories: , ,


Hoverboard Attachment Videos, Children Racing HoverKarts, Hoverboard Attachment Kart Contents

  1. Spare Foam Pad
  2. Allen Keys
  3. Hex Wrench
  4. Spacers
  5. M6 Locknut (4 pcs)
  6. M6*15 (4 pcs)
  7. Hoverboard Attachment Kart System & Handles
  8. Hoverboard Seat
  9. Foot Plate Frame
  10. Nylon Strips
  11. Wheel Frame


How to Setup Hoverboard Attachment Chair

Having trouble setting up your Koowheel hoverboard kart? Or perhaps you just want to understand how to put a hoverboard kart together before you buy one. Follow the following photo manual and you’ll understand how to set up your hoverboard seat before you know it!

Step 1

Place the tubes together as shown in the picture below.

Step 2

Insert the bolt to secure the attachment to the tubes.

Step 3

Use the Allen wrench to tighten the bolt down.

Step 4

This is how your hoverboard attachment kart should look right now. We will now focus on turning the hoverboard attachment into a chair so you have a seat to ride on.

Step 5

Place the hoverboard attachment seat onto the attachment and insert the screws into the holes.

Step 6

Tighten the bolts down so the hoverboard attachment seat is secure.

Step 7

By this point, your hoverboard attachment go kart should look like this. It’s time to attach the hoverboard seat section to the hoverboard itself.

Step 8

Wrap the nylon strips through the hoverboard attachment system as seen in the photo below.

Step 9

Loop the nylon strips back through to secure them.

Step 10

Pull the nylon strips through tightly through the Koowheel hoverboard kart.

Step 11

Your hoverboard go kart is almost complete. Now we need to tighten everything together so its secure to the hoverboard.

Step 12

Tighten everything down as shown.

Step 13

Using the allen wrench, tighten the attachment.

Step 14

By now your hoverboard kart attachment is almost complete. Its time to install the wheel on the front of the hoverboard attachment so you can have a place for your feet while you ride.

Step 15

Attach the wheel frame / foot poles to the hoverboard attachment that you’ve already put together.

Step 16

Tighten the nut on the end using your hand. It should grip well enough to hand-tighten it, no need to overtighten, we will secure the hoverboard kart in the next steps.

Step 17

Now your hoverboard wheel frame should appear like this, with the nuts hand-tightened down. We only have one last step to complete the hoverboard kart setup.

Step 18

Tighten down the clamps on both sides of the wheel frame. Your hoverboard attachment is now complete. If you have friends that could benefit from our instructions, tell them you learned how to setup a hoverboard cart on our website and share this page with them!



Note: our hoverboard kart produced from China factory, the price is the official sales price, and it has a quality warranty in 30 days

What Comes Inside the Hoverboard Kart Box

HoverKart Contents


There are no reviews yet.

Be the first to review “Hoverboard Go Kart Attachment with Seat/Chair for self balance scooter”
Review now to get coupon!

Your email address will not be published. Required fields are marked *